makeshift filtration

Post all Pond construction Topics here including DIY bits and pieces

Moderators: B.Scott, vippymini, Gazza, Manky Sanke

Post Reply
User avatar
GERRY5
Great White Shark
Great White Shark
Posts: 903
Joined: Mon Apr 03, 2006 10:54 pm
Location: feurteventura canary islands spain

Post by GERRY5 »

dave ...it enters towards the top \or over the top and is directed downwards at an angle if possible to create a vortex effect in the outer barrel , also stops it splashing all over the place and keeps it quieter, also puts less strain on the pump as it dosnt have to push against a wall of water in the barrel if you place the incoming low down , ....hope that helps a bit :wink: :wink: :wink: :wink:
Top
Post Reply

Return to “Pond Construction and Pond Gizmo's And DIY bits and pieces”