Page 1 of 1
reinforcement mesh
Posted: Fri Feb 13, 2009 10:27 pm
by Russ Little Pond
How much does one sheet of reinforcement mesh cost ??
Re: reinforcement mesh
Posted: Fri Feb 13, 2009 11:56 pm
by Andy E
Not sure if this is the sort if thing you are after?
A142 is widely used in bases.
http
://www.dyersmetalmesh.co.uk/Catalogue/r ... d_mesh.ASP" onclick="window.open(this.href);return false;
Andy
Re: reinforcement mesh
Posted: Sat Feb 14, 2009 7:35 pm
by steveW
Hi, not sure Russ litle pond is right, as it states it as fabric!!
this is what most people use,
[url]http
://cgi.ebay.co.uk/REINFORCING-MESH,-REB ... 8001r16538[/url]
this shows what you need, you just ask your local builders merchant for it, i think it was about £40 when i last bought it. buying a single sheet is expensive, but if you buy it when you buy all the other pond construction bit, you should get a discount!!
good luck

Re: reinforcement mesh
Posted: Sat Feb 14, 2009 7:51 pm
by Russ Little Pond
Thanks lads,
I rang my local builders yard and they do a 8 x 16 sheet for £25, its for the slab the filters will sit on.