Mending Airpumps

Post all Pond construction Topics here including DIY bits and pieces

Moderators: B.Scott, vippymini, Gazza, Manky Sanke

Post Reply
netsukekoi
Nurse Shark
Nurse Shark
Posts: 50
Joined: Sun Jun 29, 2008 7:40 pm
Location: Portsmouth

Mending Airpumps

Post by netsukekoi »

Hi All, My 1st post over here (just defected from Koi Chat...) - sorting the garage yesterday I find I have 4 or 5 faulty airpumps.

Does anyone in the UK service or repair these things? Is there somewhere I can get parts? (they all need more than diaphragms)

Thanks, Martin :?
User avatar
gingeletiss
Great White Shark
Great White Shark
Posts: 839
Joined: Sun Jan 29, 2006 5:54 pm
Location: Southampton

Re: Mending Airpumps

Post by gingeletiss »

Hi Martin

You can get the kits, depends on the make and model.
netsukekoi
Nurse Shark
Nurse Shark
Posts: 50
Joined: Sun Jun 29, 2008 7:40 pm
Location: Portsmouth

Re: Mending Airpumps

Post by netsukekoi »

Thaks Dave - should have been clearer - none of them need diaphragms / they all need something more major (eg a piece of the internal housing, or repair of an electrical fault).
User avatar
vippymini
architeuthis moderator
architeuthis moderator
Posts: 851
Joined: Sun Sep 04, 2005 10:00 pm
Location: hertfordshire

Re: Mending Airpumps

Post by vippymini »

i would have thought most of the pumps would not be economical to repair in that way, unless you have two the same with differing faults.
netsukekoi
Nurse Shark
Nurse Shark
Posts: 50
Joined: Sun Jun 29, 2008 7:40 pm
Location: Portsmouth

Re: Mending Airpumps

Post by netsukekoi »

You are probably right - but at £250 a time and knowing I need a new one, I thought I'd try. Thanks anyway, Martin :cry:
User avatar
vippymini
architeuthis moderator
architeuthis moderator
Posts: 851
Joined: Sun Sep 04, 2005 10:00 pm
Location: hertfordshire

Re: Mending Airpumps

Post by vippymini »

which pumps are they?
maybe a quester has another with a fault :lol:
Chagoiboy
Nurse Shark
Nurse Shark
Posts: 86
Joined: Sat Aug 13, 2005 11:33 pm

Re: Mending Airpumps

Post by Chagoiboy »

I just repaired an airtech 80, it had blown its diaphragms and one of the electromagnets was shafted. Thats all there is to them apart from the armature with the magnets in the middle. Cost me £100 but i couldnt afford a new pump (£200) i bought new diaphragms and electromagnets. Seems to be fine so far...
netsukekoi
Nurse Shark
Nurse Shark
Posts: 50
Joined: Sun Jun 29, 2008 7:40 pm
Location: Portsmouth

Re: Mending Airpumps

Post by netsukekoi »

The one I was hoping to recover is a Secoh EL-100 - it shows no sign of life, so an electrical fault of some form.

Martin :(
Jules
architeuthis moderator
architeuthis moderator
Posts: 882
Joined: Sat Aug 13, 2005 10:10 pm
Location: Kent

Re: Mending Airpumps

Post by Jules »

Martin I also have an 80 that has given up the ghost too. You have a PM I need an answer too for tomorrow.

Jules
Jagger
Hammer Head shark
Hammer Head shark
Posts: 296
Joined: Sun Dec 03, 2006 11:32 am
Location: Kemsing,Kent.

Re: Mending Airpumps

Post by Jagger »

Martin,

They've got a service manual on here.

http://www.septictankparts.com/products/vie ... ear-Pumps/
netsukekoi
Nurse Shark
Nurse Shark
Posts: 50
Joined: Sun Jun 29, 2008 7:40 pm
Location: Portsmouth

Re: Mending Airpumps

Post by netsukekoi »

Jagger,

Thanks for that - that helps.

Would appear that there is life in my EL-100 after all. If I move the magnet and then switch on, it flies to the side where I have a split diaphragm and then stops. Not sure if this is because I activated the auto-stop or not, does not appear to do much.

So, have to assume I need a new diaphragm and a new magnet (no idea why a magnet should 'fail' but as they have replacement instructions I guess they do) - but what I really need is someone who knows what the auto-stop actually does so that I can confirm my diagnosis.

Hopefully Jules will have some news after talking to the distributor today.

Martin :?
Jules
architeuthis moderator
architeuthis moderator
Posts: 882
Joined: Sat Aug 13, 2005 10:10 pm
Location: Kent

Re: Mending Airpumps

Post by Jules »

Hi Martin.

You have mail.

Jules
Post Reply