BAKKI SHOWER AS ADD ON.
Moderators: B.Scott, vippymini, Gazza, Manky Sanke
- Bob Hart
- Site Admin
- Posts: 2292
- Joined: Sun Aug 14, 2005 8:53 am
- Location: Maidstone, Kent, England
- Contact:
Del,
As you have 2 bottom drains fitted into a 'T' then into a seive, I'd cut into the pipe as shown and fit a 2" take off. Fit a pump to this and pump over the shower.
Do the same on the other pair of pipes and you'll have a big flow over the shower.
Use eco Aquamax 16000 perhaps.
[img]http://www.koipix.com/gallery/albums/userpi ... es%201.jpg[/img]
As you have 2 bottom drains fitted into a 'T' then into a seive, I'd cut into the pipe as shown and fit a 2" take off. Fit a pump to this and pump over the shower.
Do the same on the other pair of pipes and you'll have a big flow over the shower.
Use eco Aquamax 16000 perhaps.
[img]http://www.koipix.com/gallery/albums/userpi ... es%201.jpg[/img]
Bob if i cut it were you said the water would go every were.How would i stop that.Could i cut were you said and put all 4 bottom drains on there own side valve.That would give me 2 4ins bottom drains free to go over shower.Is it a big job and is there any one you no who could do it.Thanks mate derekBob Hart wrote:Del,
As you have 2 bottom drains fitted into a 'T' then into a seive, I'd cut into the pipe as shown and fit a 2" take off. Fit a pump to this and pump over the shower.
Do the same on the other pair of pipes and you'll have a big flow over the shower.
Use eco Aquamax 16000 perhaps.
[img]http://www.koipix.com/gallery/albums/userpi ... es%201.jpg[/img]
Thanks gazza i would have to drop the pond 3ft mate big job. I think plus would have to turn all the filters off how long have i got there are beads filters.Thanks derekGazza wrote:Hi Del,
Thats what i was thinking of like Bob has pointed out.You could drain the pond down a bit (depending on how low that pipe is) or even remove the bottom drain lids and plug the holes all you need is perhaps a guy who does ponds and can dive.....any thoughts Jules
- Bob Hart
- Site Admin
- Posts: 2292
- Joined: Sun Aug 14, 2005 8:53 am
- Location: Maidstone, Kent, England
- Contact:
Get some cheap swimming pools off of ebay, or similar
Pump some of the pond out into them
Cut the 4" pipe
Block off one of the 4" pipes by the 'T' with a rubber boot 'end'. This will then seperate the 4" pipes
Fit a rubber boot bend to the other 4" pipe and straight into a 4" to 2" reducer and valve, already pre glued and dried in advance.
Pump back water into pond
All done inthe same day
Pump some of the pond out into them
Cut the 4" pipe
Block off one of the 4" pipes by the 'T' with a rubber boot 'end'. This will then seperate the 4" pipes
Fit a rubber boot bend to the other 4" pipe and straight into a 4" to 2" reducer and valve, already pre glued and dried in advance.
Pump back water into pond
All done inthe same day
Bob wish it was that easy mate.Will make some calls and see if i can get it done so i have to spare bottom drains.But thanks mate.Bob Hart wrote:Get some cheap swimming pools off of ebay, or similar
Pump some of the pond out into them
Cut the 4" pipe
Block off one of the 4" pipes by the 'T' with a rubber boot 'end'. This will then seperate the 4" pipes
Fit a rubber boot bend to the other 4" pipe and straight into a 4" to 2" reducer and valve, already pre glued and dried in advance.
Pump back water into pond
All done inthe same day
If it were my pond I would dive on the pool remove the bottom drain lid and bung with a 4 inch expanding plug. The koi could stay where they are and no water would be lost. I would then cut the 4 inch pipe and fit a rubber tee. Fit a 4 inch to 2 inch reducer and come off that with a 2 inch ball valve. You can the use this to feed the showers. Should take about 3 hours.
Good luck.
Jules
Good luck.
Jules
Can you do it then jules..Jules wrote:If it were my pond I would dive on the pool remove the bottom drain lid and bung with a 4 inch expanding plug. The koi could stay where they are and no water would be lost. I would then cut the 4 inch pipe and fit a rubber tee. Fit a 4 inch to 2 inch reducer and come off that with a 2 inch ball valve. You can the use this to feed the showers. Should take about 3 hours.
Good luck.
Jules
- Gazza
- architeuthis moderator
- Posts: 5306
- Joined: Sat Aug 13, 2005 7:24 pm
- Location: Essex,UK
- Contact:
Hi Del,
Yes i would go the Jules way all you need is a diver with some bungs and a bit of pond knowledge
Now this guy springs to mind but he is getting on now and i am not sure he still does it
[img]http://www.koipix.com/gallery/albums/userpi ... ules~0.jpg[/img]
[img]http://www.koipix.com/gallery/albums/userpi ... ules-2.jpg[/img]
Yes i would go the Jules way all you need is a diver with some bungs and a bit of pond knowledge
Now this guy springs to mind but he is getting on now and i am not sure he still does it
[img]http://www.koipix.com/gallery/albums/userpi ... ules~0.jpg[/img]
[img]http://www.koipix.com/gallery/albums/userpi ... ules-2.jpg[/img]
Jules could you put all the bottom drains on there own side valves. Thanks derek.Plus you can see your fav koi. Thats if you want the job mate. The koi could stay where they are and no water would be lost.Gazza wrote:Hi Del,
Yes i would go the Jules way all you need is a diver with some bungs and a bit of pond knowledge
Now this guy springs to mind but he is getting on now and i am not sure he still does it
[img]http://www.koipix.com/gallery/albums/userpi ... ules~0.jpg[/img]
[img]http://www.koipix.com/gallery/albums/userpi ... ules-2.jpg[/img]
- Attachments
-
- koi 6666666666666.jpg (53.82 KiB) Viewed 16076 times
Jules did you get my email about the job .Thanks derekdelboy wrote:Can you do it then jules..Jules wrote:If it were my pond I would dive on the pool remove the bottom drain lid and bung with a 4 inch expanding plug. The koi could stay where they are and no water would be lost. I would then cut the 4 inch pipe and fit a rubber tee. Fit a 4 inch to 2 inch reducer and come off that with a 2 inch ball valve. You can the use this to feed the showers. Should take about 3 hours.
Good luck.
Jules
Sorry mate. Yes i can do it.Jules wrote:Derek I have jusy walked throught the door from driving my new toy back from Germany. I will catch up with work emails tomorrow, but provisionaly yes I can do it and I can let you know when if you can wait till tomorrow. Need my bed and a glass of "medicinal"
Jules