New Shower chute for Gazza
Moderators: B.Scott, vippymini, Gazza, Manky Sanke
- Bob Hart
- Site Admin
- Posts: 2292
- Joined: Sun Aug 14, 2005 8:53 am
- Location: Maidstone, Kent, England
- Contact:
New Shower chute for Gazza
I'm now making up a set of mini showers for Gazza, but I didnt like the bottom chute I'd made for mine. So I made up a new mould and today I turned out the first Mk2 from it.
I designed it with a 20 degree slope
[img]http://www.koipix.com/gallery/albums/userpi ... CN3736.JPG[/img]
It's got a full height back to it to keep splashes 'in'
[img]http://www.koipix.com/gallery/albums/userpi ... CN3734.JPG[/img]
Side view, needs cleaning up a bit yet though. I will make it so that there is a glassed 3-4" wide bottom to it, so it will sit flat on the side of the pond and can be secured there.
[img]http://www.koipix.com/gallery/albums/userpi ... CN3735.JPG[/img]
A bottom tier put in place to show how it will fit. This will be glassed into place. The other two tiers will sit on top in the way I did mine, using 8mm stainless bar supports.
[img]http://www.koipix.com/gallery/albums/userpi ... CN3733.JPG[/img]
I designed it with a 20 degree slope
[img]http://www.koipix.com/gallery/albums/userpi ... CN3736.JPG[/img]
It's got a full height back to it to keep splashes 'in'
[img]http://www.koipix.com/gallery/albums/userpi ... CN3734.JPG[/img]
Side view, needs cleaning up a bit yet though. I will make it so that there is a glassed 3-4" wide bottom to it, so it will sit flat on the side of the pond and can be secured there.
[img]http://www.koipix.com/gallery/albums/userpi ... CN3735.JPG[/img]
A bottom tier put in place to show how it will fit. This will be glassed into place. The other two tiers will sit on top in the way I did mine, using 8mm stainless bar supports.
[img]http://www.koipix.com/gallery/albums/userpi ... CN3733.JPG[/img]
- Gazza
- architeuthis moderator
- Posts: 5306
- Joined: Sat Aug 13, 2005 7:24 pm
- Location: Essex,UK
- Contact:
Well that is looking great Bob and i thought it looked good yesterday
Do you know what the full hight will be and how much BHM it will take
Do you think they could be modified (modified sorry its not even built yet ) so it could take a sheet of matting on the top before the first shower as perhaps a mechanical; part
Do you know what the full hight will be and how much BHM it will take
Do you think they could be modified (modified sorry its not even built yet ) so it could take a sheet of matting on the top before the first shower as perhaps a mechanical; part
- Bob Hart
- Site Admin
- Posts: 2292
- Joined: Sun Aug 14, 2005 8:53 am
- Location: Maidstone, Kent, England
- Contact:
The back sheet is 25/26" high, as that it the height of the 3 tiers. So with the slope of the chute I'd say it is 30" in total.
BHM, approx 8kg per tier, roughly 25 in total
No problem putting a sheet of jap matting over the top of the BHM in the first tier.
The spray bar is of your own choice, I put 8mm holes in my piece of 1.5" pipe. If you wanted to pump larger solids than that, just put larger holes and then let the matting trap it.
BHM, approx 8kg per tier, roughly 25 in total
No problem putting a sheet of jap matting over the top of the BHM in the first tier.
The spray bar is of your own choice, I put 8mm holes in my piece of 1.5" pipe. If you wanted to pump larger solids than that, just put larger holes and then let the matting trap it.
- Bob Hart
- Site Admin
- Posts: 2292
- Joined: Sun Aug 14, 2005 8:53 am
- Location: Maidstone, Kent, England
- Contact:
Gazza,
Isn't your tank built to be 3" wide? If so this can go in the same place as your BST and you will be able to screw it down into the 3" tank surround. It will have a piece of wood glassed into place to allow this.
I know your pipework comes up the back, so the spray bar can have a 'T' in the middle of it and the top chute can have a 'U' slot/hole cut in the back/splash board.
Isn't your tank built to be 3" wide? If so this can go in the same place as your BST and you will be able to screw it down into the 3" tank surround. It will have a piece of wood glassed into place to allow this.
I know your pipework comes up the back, so the spray bar can have a 'T' in the middle of it and the top chute can have a 'U' slot/hole cut in the back/splash board.
- Bob Hart
- Site Admin
- Posts: 2292
- Joined: Sun Aug 14, 2005 8:53 am
- Location: Maidstone, Kent, England
- Contact:
I cant be sure on exactly how much each tier holds, but I'd expect you could easily pump 1000 gaslons/hour over the them. I'm doing about 500 gallons/hour, I really need to re-measure how much.
I'm sure Gazza will do more than me as he uses an Aquamax 8000 direct from the bottom drain.
Gazza - pipe up the back of the unit, bend going through hole in the back of the splash guard, though a 'U' shaped slot in the top tier, to a 'T', which joins into the middle of the flow bar, a stop on each end. Got it?????
I'm sure Gazza will do more than me as he uses an Aquamax 8000 direct from the bottom drain.
Gazza - pipe up the back of the unit, bend going through hole in the back of the splash guard, though a 'U' shaped slot in the top tier, to a 'T', which joins into the middle of the flow bar, a stop on each end. Got it?????
- Gazza
- architeuthis moderator
- Posts: 5306
- Joined: Sat Aug 13, 2005 7:24 pm
- Location: Essex,UK
- Contact:
I think Ive got it Bob i thought you was meaning a U shaped spray bar at first for more flow
Andy,
At the moment both Bob and myself are filtering around 450-500gls using less BHM than they will have in the shower so one of these shower could easily handle 500gls.
I have 9 koi in my tank ranging from 32cm up to 47cm
Andy,
At the moment both Bob and myself are filtering around 450-500gls using less BHM than they will have in the shower so one of these shower could easily handle 500gls.
I have 9 koi in my tank ranging from 32cm up to 47cm
- Gazza
- architeuthis moderator
- Posts: 5306
- Joined: Sat Aug 13, 2005 7:24 pm
- Location: Essex,UK
- Contact:
Sounds like a good idea Bob.....i may have to purchase some of you if i haven't got enough as i think the showers will hold more than my BST
still more media means more filtration means more fish or more food
Once the shower is fitted i will be putting the BST up for sale as its done so well since its bin installed
still more media means more filtration means more fish or more food
Once the shower is fitted i will be putting the BST up for sale as its done so well since its bin installed