3 boxes a bit of pipe with a end result. **NOW UPDATED**

vippymini · Post by **vippymini** » Thu Jun 29, 2006 8:25 pm

As we have had a nice sunny afternoon hubbys dissapered into the garden for a blue peter moment!

Hes decided we are going to invest in a sturdy water butt as a small QT tank , but before we have made the purchase the filteration system has been made from parts laying around around the house and garden. This has cost us the grand total of Ã‚Â£0.00

The plan is using wood or something sturdy is to sit the shower above the the water butt and connet the shower to the water butt via 1 1/2 pipe work.. pictures to follow soon of water butt conected . In the mean time heres the new filteration shower!!!

[img]http://i5.photobucket.com/albums/y199/vippy ... hower1.jpg[/img]

[img]http://i5.photobucket.com/albums/y199/vippy ... hower2.jpg[/img]

[img]http://i5.photobucket.com/albums/y199/vippy ... hower3.jpg[/img]

[img]http://i5.photobucket.com/albums/y199/vippy ... sower4.jpg[/img]

Gazza · Post by **Gazza** » Thu Jun 29, 2006 8:32 pm

Hey that looks good and i like the water chute

I seem to remember Bob having a shower on top of a round thing which may even of been a vortex and you should of seen the fish grow

Chagoiboy · Post by **Chagoiboy** » Fri Jun 30, 2006 2:43 am

What media are you planning to use if you dont mind me asking?

vippymini · Post by **vippymini** » Fri Jun 30, 2006 12:39 pm

I think hes planing to use alpha grog!!!!

Capt Nemo · Post by **Capt Nemo** » Fri Jun 30, 2006 2:02 pm

That looks Great !

Don't fancy make up another one do you ???
would be perfect for my Q.Tank I'm putting in my Garage

Nemo.

macaws fly · Post by **macaws fly** » Fri Jun 30, 2006 6:42 pm

right well i've had my 4hrs sleep after a busy nightshift, so its out to the garden for some more BP magic

Jane got one of the traditional water-butts this morning and heres the results

first a 4" end has a 1.5" tank connector fitted and then fibreglassed to the bottom side of the tank ( i don't buy tank connectors anymore)
[img]http://i5.photobucket.com/albums/y199/vippy ... glass2.jpg[/img]
its then removed and cleaned up. this is the hole ready for re-fitting
[img]http://i5.photobucket.com/albums/y199/vippy ... olecut.jpg[/img]
next a stainless mesh is cut and drilled to fit over the hole
[img]http://i5.photobucket.com/albums/y199/vippy ... ghmesh.jpg[/img]
now the whole lot is glued and bolted together
[img]http://i5.photobucket.com/albums/y199/vippy ... sideqt.jpg[/img]
[img]http://i5.photobucket.com/albums/y199/vippy ... demesh.jpg[/img]
[img]http://i5.photobucket.com/albums/y199/vippy ... qtpipe.jpg[/img]
right so you now get the idea heres the nearly finished article. all thats needed now is the plumbing in of the pump and some good clean water and away we go
[img]http://i5.photobucket.com/albums/y199/vippy ... shower.jpg[/img]
[img]http://i5.photobucket.com/albums/y199/vippy ... luslid.jpg[/img]
well thats my quota for the BP olyimpice

Gazza · Post by **Gazza** » Fri Jun 30, 2006 7:32 pm

Mark,

Its not finished

you need some more pipe and a pump

I can see that working spot on they always do so why do so why does it cost a fortune for filtration

fatherted · Post by **fatherted** » Fri Jun 30, 2006 8:43 pm

Media might add a few Ã‚Â£Ã‚Â£Ã‚Â£'s to the cost but that really is a bargain set up. What's going in the QT then?

Gazza · Post by **Gazza** » Fri Jun 30, 2006 8:54 pm

Ted i bet Mark has already got something ready to go in as he is a master of "having things" to do with pond stuff laying around

vippymini · Post by **vippymini** » Fri Jun 30, 2006 9:08 pm

my subspicion is that he has some alfa grog about or maybe some k1 and possible som jap mat , ill find that out tommorow. If he aint it will be a couple of bags of alpha grog....

The whole idea of it is to be used as a emergancy QT when needed and when not in use it can all be stored in the water butt, or he suggested we grow some of the fry we got in it !!!...

so now so far its cost Ã‚Â£24.99

GERRY5 · Post by **GERRY5** » Fri Jun 30, 2006 11:10 pm

i reckon thats gonna be chaotic k1 in the green drum , alphagrog in the tt , gonna work a treat ....like it ...like the tank connection idea as well ..well done mark

vippymini · Post by **vippymini** » Fri Jun 30, 2006 11:18 pm

Gerry , forget the k1..lol... it was a passing thought as there no where for it to go!!!!

it will be alpha grog in the shower tower and the butt is the Qt tank!!!!!

GERRY5 · Post by **GERRY5** » Fri Jun 30, 2006 11:30 pm

oops lost another bet .....story of my life

mekoi · Post by **mekoi** » Sat Jul 01, 2006 1:22 am

I've used that s/steel mesh before for my exit pipe(from settlement to moving bed). After a while(4 weeks) I've noticed that the water level difference was so obvious and been scratching my head for days finding why. Finally I thought about the stainless steel mesh and as soon as I took it out I felt the gush of water. The screen was built up with algae that restricted the flow

mind you we are still in winter season here

so I've replace it with larger size and detachable too

Just want to share my experience

macaws fly · Post by **macaws fly** » Sun Jul 02, 2006 4:12 pm

in answer to Mekoi, the fish going in are only fry of about 1/2 inch so the mesh has to be small.
and Gazza i did say in my post its NEARLY finished> LOL

right it now has a pump (aquamax 10,000)
[img]http://i5.photobucket.com/albums/y199/vippy ... ie0002.jpg[/img]
boy does the water flow
[img]http://i5.photobucket.com/albums/y199/vippy ... ie0001.jpg[/img]
[img]http://i5.photobucket.com/albums/y199/vippy ... ie0003.jpg[/img]

only got a couple of small water spirts to sort out now.
as for turnover rate i'm guessing that with the height of the water and restriction of the pipework i'm getting around 40 times an hour WOWLMAO

Simply Koi and More Koi

3 boxes a bit of pipe with a end result. NOW UPDATED

3 boxes a bit of pipe with a end result. NOW UPDATED

update on small QT shower