Ted's Pond upgrade
Moderators: B.Scott, vippymini, Gazza, Manky Sanke
I am glad Dave has found another company where you can get foam from, I also know there is a place near me that make's insulation, and they assured us that it would be fine for pond's and it would work well, but the fibreglasser wouldn't have it, I had to have Polyfibre foam. I think Dave mean's your pond will end up looking like this
[img]http://www.koivista.com/files/kimR/24491_S_CAMERA_019.jpg[/img]
you can see where foam sheet's are and the fibreglass is not smooth at all, it hasn't got sharp bit's, they were all rubbed down, but the lump's and ridge's will collect god know's what over time.
Good luck with the rest of the build Ted.
[img]http://www.koivista.com/files/kimR/24491_S_CAMERA_019.jpg[/img]
you can see where foam sheet's are and the fibreglass is not smooth at all, it hasn't got sharp bit's, they were all rubbed down, but the lump's and ridge's will collect god know's what over time.
Good luck with the rest of the build Ted.
Hi Ted
No I don't think we are, we want the very best we can get for our koi, I won my fibreglassing in a comp, and I had vision's of a beautiful smooth finish, when I saw it for it's glory I cried my eye's out. I will say if I had been paying for it I would not of paid a penny. Maybe you are right I just wanted everything as perfect as I could get it
No I don't think we are, we want the very best we can get for our koi, I won my fibreglassing in a comp, and I had vision's of a beautiful smooth finish, when I saw it for it's glory I cried my eye's out. I will say if I had been paying for it I would not of paid a penny. Maybe you are right I just wanted everything as perfect as I could get it
Fibreglass finish
Ted
we should have the best finish on our ponds that is possible whether covered with algae or not, it takes no longer to do the job correctly then it does to bodge it and run,
Every pond I glass I treat as a show pond, I dont rush and take pride in my work, but that is beacause I keep koi myself and understand what is required. I refused to glass one earlier this year as the foam had been fitted badly and would have had lumps and ridges all over it, when the guy had removed and refited the foam correctly, as detailed by the inventor of foam lining Mr M Cox of Koi UK I then went and glassed it, the client saw what a difference to the finish it made and thanked me.
Kim
I am so sorry you got the rough end of the stick as you say good job it was free, but on the bright side it holds water and you pond is now running.
Bit of water never stopped me glassing ways and means of dealing with it no problem.
we should have the best finish on our ponds that is possible whether covered with algae or not, it takes no longer to do the job correctly then it does to bodge it and run,
Every pond I glass I treat as a show pond, I dont rush and take pride in my work, but that is beacause I keep koi myself and understand what is required. I refused to glass one earlier this year as the foam had been fitted badly and would have had lumps and ridges all over it, when the guy had removed and refited the foam correctly, as detailed by the inventor of foam lining Mr M Cox of Koi UK I then went and glassed it, the client saw what a difference to the finish it made and thanked me.
Kim
I am so sorry you got the rough end of the stick as you say good job it was free, but on the bright side it holds water and you pond is now running.
Bit of water never stopped me glassing ways and means of dealing with it no problem.
Hi Kim,
was it the glassing or was it the way the foam had been fitted? or did the glasser do both?
i too foamed my pond. fairly expensive but not much more than i would probably have had to pay someone for rendering and the benefits are greater. i did spend some time trying to make the foam joints as seemless as possible. even using body filler to do this. it still wasnt perfect but in all honesty, not it is full of water and algae nothing is visible anyway.
wish i knew about Kingspan, proabably cheaper that the polyfibre stuff. the lad who glassed my pond said it was much easier than glassing onto render.
i thought you were happy with your job?
carl.
was it the glassing or was it the way the foam had been fitted? or did the glasser do both?
i too foamed my pond. fairly expensive but not much more than i would probably have had to pay someone for rendering and the benefits are greater. i did spend some time trying to make the foam joints as seemless as possible. even using body filler to do this. it still wasnt perfect but in all honesty, not it is full of water and algae nothing is visible anyway.
wish i knew about Kingspan, proabably cheaper that the polyfibre stuff. the lad who glassed my pond said it was much easier than glassing onto render.
i thought you were happy with your job?
carl.
You must have read my mind Gazza. I was thinking that you lot must think I am sitting here with my feet up but no, I am progressing but haven't had much time for pics and posting them here. But tonight it is time for an update.
First of all I needed to do something with all those shelves that I ended up with i.e. make sure they are not flat enough for Roz to put some plant pots on.
[img]http://www.koivista.com/files/fatherted/278 ... 009001.jpg[/img]
Then onto the walls. Rendering wasn't as difficult as I had expected and the finish isn't bad for a first timer.
[img]http://www.koivista.com/files/fatherted/278 ... 040001.jpg[/img]
[img]http://www.koivista.com/files/fatherted/278 ... 043001.jpg[/img]
The floor was a bit harder as it is really hard to judge what was flat.
[img]http://www.koivista.com/files/fatherted/278 ... 052001.jpg[/img]
I have also sorted out the main pipe run and done a nice lid for the filter to stop the K1 spray going all over the bottom of the timber lid.
[img]http://www.koivista.com/files/fatherted/278 ... 047001.jpg[/img]
And I have also been experimenting with air pipe, mixing hose and speedfit to run past the filter bays with valves to regulate the flow.
[img]http://www.koivista.com/files/fatherted/278 ... 049001.jpg[/img]
So now I have just got to be patient and wait for the glassing to get done. Rushed out and shoved up the best shelter I could manage to keep things dry tonight.
First of all I needed to do something with all those shelves that I ended up with i.e. make sure they are not flat enough for Roz to put some plant pots on.
[img]http://www.koivista.com/files/fatherted/278 ... 009001.jpg[/img]
Then onto the walls. Rendering wasn't as difficult as I had expected and the finish isn't bad for a first timer.
[img]http://www.koivista.com/files/fatherted/278 ... 040001.jpg[/img]
[img]http://www.koivista.com/files/fatherted/278 ... 043001.jpg[/img]
The floor was a bit harder as it is really hard to judge what was flat.
[img]http://www.koivista.com/files/fatherted/278 ... 052001.jpg[/img]
I have also sorted out the main pipe run and done a nice lid for the filter to stop the K1 spray going all over the bottom of the timber lid.
[img]http://www.koivista.com/files/fatherted/278 ... 047001.jpg[/img]
And I have also been experimenting with air pipe, mixing hose and speedfit to run past the filter bays with valves to regulate the flow.
[img]http://www.koivista.com/files/fatherted/278 ... 049001.jpg[/img]
So now I have just got to be patient and wait for the glassing to get done. Rushed out and shoved up the best shelter I could manage to keep things dry tonight.