Help with bakki shower.
Posted: Sat Dec 31, 2011 7:25 pm
Hi guys,
I want to set up a diy bakki shower fed from a Compact sieve or a vortex chamber.
My set up,
550GL vat free standing at 3ft high with limited floor space, with retro BD to a Superfish 1800 to the UV to a compact sieve (i use a small stool to reach inside for cleaning) to pond.
I have three fish of 8 inches each, more will be added later in the year.
My issues,
Limited space between top of pond and bottom of compact sieve shelf, 18 inches, i have a below water pipe 2 inch (in or out) 6 inches below top of pond.
The crates im looking at are these http://www.solentplastics.co.uk/mass...ing-containers Size (Ext): L 600 x W 400 x H 170mm at 35 ltrs.
If i use the compact sieve i can get 3 crates at a push 4, 2 with media and one for water return, or 3 crates with media and last crate emptys on to pond surface.
I can use a thinner crate at 120mm instead of 170mm, i want to use BHM and im unsure if the gap between crate bottom and media in the crate below will be too small..
I could use the retro BD to a suitable vortex then external pump to bakki, my issue is my BD to pump pipe is 1.5" and im unsure if the superfish 1800 pump would empty the vortex quicker than the BD 1.5" pipe could supply the vortex, 2" may be ?
Thanks
I want to set up a diy bakki shower fed from a Compact sieve or a vortex chamber.
My set up,
550GL vat free standing at 3ft high with limited floor space, with retro BD to a Superfish 1800 to the UV to a compact sieve (i use a small stool to reach inside for cleaning) to pond.
I have three fish of 8 inches each, more will be added later in the year.
My issues,
Limited space between top of pond and bottom of compact sieve shelf, 18 inches, i have a below water pipe 2 inch (in or out) 6 inches below top of pond.
The crates im looking at are these http://www.solentplastics.co.uk/mass...ing-containers Size (Ext): L 600 x W 400 x H 170mm at 35 ltrs.
If i use the compact sieve i can get 3 crates at a push 4, 2 with media and one for water return, or 3 crates with media and last crate emptys on to pond surface.
I can use a thinner crate at 120mm instead of 170mm, i want to use BHM and im unsure if the gap between crate bottom and media in the crate below will be too small..
I could use the retro BD to a suitable vortex then external pump to bakki, my issue is my BD to pump pipe is 1.5" and im unsure if the superfish 1800 pump would empty the vortex quicker than the BD 1.5" pipe could supply the vortex, 2" may be ?
Thanks