Page 1 of 1
Fluke M
Posted: Sun Mar 13, 2011 12:45 pm
by emmaandaj
Hi Guys,
Spotted a fish yesterday flashing-pulled a few out today for some scrapes and have found flukes! Ive been reading the other posts regarding fluke treatments- i have a plenty of fluke M is it ok to treat at 8 degrees? Also i read on one of the posts you have to mix it with acetone-how much do i need to mix with a 5,500 gallon sachet? And also where do i get acetone from?
Many thanks Andy
Re: Fluke M
Posted: Sun Mar 13, 2011 12:54 pm
by Gazza
Hi Andy,
You found something then
I am not 100% on Fluke M as i have never used it but know of many who have and still had to treat and re treat but its what you have so you will have to go with it.
You dose with Acetone @ 10ml per 1000gls and its basically nail varnish if however you do get stuck mate i do have some here and some Flunonel (the proper stuff) if you need it mate.
Re: Fluke M
Posted: Sun Mar 13, 2011 2:28 pm
by emmaandaj
Hi Gazza,
Just wanted to thankyou for the advise earlier today-ive treated the main pond, fingers crossed
Cheers Andy
Re: Fluke M
Posted: Sun Mar 13, 2011 3:23 pm
by Gazza
Hi Andy,
No problem mate anytime
Just keep an eye on them now and see how it goes and let us know how it goes.
Re: Fluke M
Posted: Sun Mar 13, 2011 10:21 pm
by StuW
Gazza wrote:Hi Andy,
You found something then
I am not 100% on Fluke M as i have never used it but know of many who have and still had to treat and re treat but its what you have so you will have to go with it.
You dose with Acetone @ 10ml per 1000gls and its basically nail varnish if however you do get stuck mate i do have some here and some Flunonel (the proper stuff) if you need it mate.
Just to clarify, isnt acetone nail varnish remover
Re: Fluke M
Posted: Sun Mar 13, 2011 10:33 pm
by Gazza
Hi Stu,
Yes it sure is