Page 1 of 1

Cleaning my Ultrasieve

Posted: Fri Jul 02, 2010 1:27 pm
by bicolormoth
* .. after re-jigging my air pumps yersterday I was giving the Ultrasive2 a bit of a clean. I always have to clean out the inlet chamber with a brush as the 'mulm' collects on the vertical walls and the slopey bit leading up to the wier. I use a filter brush on the end of a stick, its like a 'bog-brush'. anyway i then thought i would try a couple of airstones in there. WOW ! what a difference it makes.
I have never heard of anyone else trying this but have to say it works great , i highly recommend it to anyone with a sieve. :wink:

Russ.

Re: Cleaning my Ultrasieve

Posted: Sat Jul 03, 2010 8:37 am
by des
yes it does work i have been using air stones for about 2 years in the seives,
keep doing it it does help lift the crap

des

Re: Cleaning my Ultrasieve

Posted: Mon Jul 05, 2010 9:04 pm
by Russ Little Pond
Im going to try that on my compact sieve.