Re: Another attempt to Remove Dermo
Posted: Sun May 08, 2011 10:41 pm
Hi Mark,
Well it may not be 100% but it looks much better i think.
Well it may not be 100% but it looks much better i think.
Mark
Simply Koi and More Koi
Enjoy Your Koi Talk
http://www.koiquest.co.uk/forum/
Another attempt to Remove Dermo
Page 2 of 2
Re: Another attempt to Remove Dermo
Posted: Sun May 08, 2011 10:52 pm
Too much lumpy for my liking Gazza.... but there is always silver nitrate eh?
Mark
Mark
Re: Another attempt to Remove Dermo
Posted: Mon May 09, 2011 9:57 am
you dont wanna be looking at silver nitrate as a matter of course its evil stuff
i told paul this will either work or go horribly wrong at best im willing to bet the fin will be permanenlty stained black
look at my hands and there i never noticed anything going on and they are still black today
dunc
i told paul this will either work or go horribly wrong at best im willing to bet the fin will be permanenlty stained black
look at my hands and there i never noticed anything going on and they are still black today
dunc
Re: Another attempt to Remove Dermo
Posted: Mon May 09, 2011 1:23 pm
Dunc,
I have to admit, I hadnt heard of silver nitrate until I saw it posted on here, so will take your advice as and when it becomes a required treatment.
Hoping the current repair heals itself without further need to intervene.
I shall keep an eye on it and post as and when it changes in either direction.
Mark
I have to admit, I hadnt heard of silver nitrate until I saw it posted on here, so will take your advice as and when it becomes a required treatment.
Hoping the current repair heals itself without further need to intervene.
I shall keep an eye on it and post as and when it changes in either direction.
Mark
Re: Another attempt to Remove Dermo
Posted: Sat May 28, 2011 5:31 pm
As expected the koi needed further treatment as stupidly (I seem to be struggling to catch on quickly 
) the first treatment did not make use of the wart freezer treatment, so planned for this time round to throw everything I could at it.
Points to note on the photo's;-
1 The dermo has now gone through to the other side of the tail, and you can see from the pin sized hole left there that it comes through the actual ray cartilage.
2 On the original site of the problem it has increased in size, so all surface skin removed in this area prior to attacking the dermo (appeared mostly between the rays on this side) firstly with the nitro, repeatedly (four times total) then also overall the area was given HP at 6% prior to Mercurochrome 2% and lock and seal plus.
3 The other side of the tail had the same treatment, before the main site, which I think we could see the result of through the other side.
Planning to monitor for a week, then re-inspect.
The small lump on the other side
The hole exposed
The original site
Post treatment
) the first treatment did not make use of the wart freezer treatment, so planned for this time round to throw everything I could at it.Points to note on the photo's;-
1 The dermo has now gone through to the other side of the tail, and you can see from the pin sized hole left there that it comes through the actual ray cartilage.
2 On the original site of the problem it has increased in size, so all surface skin removed in this area prior to attacking the dermo (appeared mostly between the rays on this side) firstly with the nitro, repeatedly (four times total) then also overall the area was given HP at 6% prior to Mercurochrome 2% and lock and seal plus.
3 The other side of the tail had the same treatment, before the main site, which I think we could see the result of through the other side.
Planning to monitor for a week, then re-inspect.
The small lump on the other side
The hole exposed
The original site
Post treatment
Re: Another attempt to Remove Dermo
Posted: Mon Aug 01, 2011 9:19 pm
Update pic attached - rear of tail now clear again, but front side shows return of the dermo, but moved to one side of the original site.
Repeated treatment so posted purely to keep a timeline on this problem.
Repeated treatment so posted purely to keep a timeline on this problem.