I need to get some O rings for
an Elektra Pro UV Steraliser
Does anyone know where I'll be able to buy them from
there not normal O rings there about 50mm with a large flat
side opposite the O ring side
Best Regards
O ring supplier
Moderators: B.Scott, vippymini, Gazza, Manky Sanke
Re: O ring supplier
any chance of a photo?
Jules
Jules
- herbie
- Hammer Head shark
- Posts: 255
- Joined: Fri Sep 23, 2005 8:31 pm
- Location: Tonbridge. West Kent. almost Sussex/Surrey. Senior Structural Technician(Retired due to my MS)
Re: O ring supplier
Jules
If I can find either of the Old ones I will get you a photo
Best Regards
If I can find either of the Old ones I will get you a photo
Best Regards
-
- Hammer Head shark
- Posts: 219
- Joined: Sat May 05, 2007 9:04 pm
- Location: Westcliff-on-Sea, Essex
Re: O ring supplier
Herbie,
Send an e-mail to info@aceofkoi.co.uk They have O rings listed in their catalogue, so should be able to help you out.
You could ring though, 01277 375976. I`ve always had good fast service.
Chris (another one)
Send an e-mail to info@aceofkoi.co.uk They have O rings listed in their catalogue, so should be able to help you out.
You could ring though, 01277 375976. I`ve always had good fast service.
Chris (another one)
- herbie
- Hammer Head shark
- Posts: 255
- Joined: Fri Sep 23, 2005 8:31 pm
- Location: Tonbridge. West Kent. almost Sussex/Surrey. Senior Structural Technician(Retired due to my MS)
Re: O ring supplier
Chris I tryed ace of koi but the dont stock the O rings for the UV
Best Regards
Best Regards