reinforcement mesh
Moderators: B.Scott, vippymini, Gazza, Manky Sanke
-
- Hammer Head shark
- Posts: 255
- Joined: Sat Jun 21, 2008 7:25 pm
- Location: England.
- Contact:
reinforcement mesh
How much does one sheet of reinforcement mesh cost ??
Re: reinforcement mesh
Not sure if this is the sort if thing you are after?
A142 is widely used in bases.
http://www.dyersmetalmesh.co.uk/Catalogue/r ... d_mesh.ASP" onclick="window.open(this.href);return false;
Andy
A142 is widely used in bases.
http://www.dyersmetalmesh.co.uk/Catalogue/r ... d_mesh.ASP" onclick="window.open(this.href);return false;
Andy
Re: reinforcement mesh
Hi, not sure Russ litle pond is right, as it states it as fabric!!
this is what most people use,
[url]http://cgi.ebay.co.uk/REINFORCING-MESH,-REB ... 8001r16538[/url]
this shows what you need, you just ask your local builders merchant for it, i think it was about £40 when i last bought it. buying a single sheet is expensive, but if you buy it when you buy all the other pond construction bit, you should get a discount!!
good luck
this is what most people use,
[url]http://cgi.ebay.co.uk/REINFORCING-MESH,-REB ... 8001r16538[/url]
this shows what you need, you just ask your local builders merchant for it, i think it was about £40 when i last bought it. buying a single sheet is expensive, but if you buy it when you buy all the other pond construction bit, you should get a discount!!
good luck
-
- Hammer Head shark
- Posts: 255
- Joined: Sat Jun 21, 2008 7:25 pm
- Location: England.
- Contact:
Re: reinforcement mesh
Thanks lads,
I rang my local builders yard and they do a 8 x 16 sheet for £25, its for the slab the filters will sit on.
I rang my local builders yard and they do a 8 x 16 sheet for £25, its for the slab the filters will sit on.