If you give me the diameter of the vortex I can cut down your matting for you so it fits snug.
Jules
07973842111
p.s. excuse the size of the attachment
Answer replacement
Moderators: B.Scott, vippymini, Gazza, Manky Sanke
Re: Answer replacement
- Attachments
-
- vortex picture.jpg (101.51 KiB) Viewed 6802 times
Re: Answer replacement
Hi all,
I have a Cloverleaf 3-chamber filter (Genesis). Could I add this matting to my first chamber (vortex) as shown in the pics? I also use (static) K3 in my final chamber and have some spare. If I was able to put the matting in the 1st chamber, could I use the K3 after the matting in the 1st chamber?
Thanks,
Mark
I have a Cloverleaf 3-chamber filter (Genesis). Could I add this matting to my first chamber (vortex) as shown in the pics? I also use (static) K3 in my final chamber and have some spare. If I was able to put the matting in the 1st chamber, could I use the K3 after the matting in the 1st chamber?
Thanks,
Mark
Re: Answer replacement
Yes mark you could. Same principle and you can use this method in any shaped chamber as long as you support the media for 45% min of its surface area.
Jules
Per Marre Perr Terram
Jules
Per Marre Perr Terram
Re: Answer replacement
When i first started out i done exactly the same to my Genisis,worked a treat.
Graham
Graham
Re: Answer replacement
Thanks - I'll have a look at the weekend. Just need to find something to support the matting.