Certikin Skimmer

[Taggy]

I have just been looking at the rear of my skimmer and see there is a overflow fixture,has anyone got any ideas what size it is and wher i can get fittings from and what i would need at all??



Graham

[Andy E]

Hi Graham,

I've used 22mm pipe in mine going into a 90deg bend with a load of Den Brevan to seal it. Works a treat!

Andy

[Jules]

Answer your phone special Agent Bin Laden

Jules

[delboy]

Answer your phone special Agent Bin Laden

Jules

So there is two bin ladens jules.

[Taggy]

Answer yours too

Have left a message.


Graham

[Andy E]

Hi there,

You may have sorted your overflow now? But here's a couple of pics of mine. I set the skimmer so that the top up line on the skimmer could be used as an overflow straight into my waste line you could easily as you suggested put a T on the inside to adjust the water level.

Regards,

Andy

[Taggy]

Cheers Andy,Been on me hol's hence belated thank's.Young Jules has voluteered himself to do for me in the near future,as im not to technicly or physicaly minded.


Graham