Messing With Water

Post all Pond construction Topics here including DIY bits and pieces

Moderators: B.Scott, vippymini, Gazza, Manky Sanke

gort
Sandbar shark
Sandbar shark
Posts: 22
Joined: Sat Sep 01, 2007 11:21 pm

Post by gort »

Are the pipes and fittings easily available?
Plumbing outlet?
Presumably this would be good for airlines as well.
Davej
Bull Shark
Bull Shark
Posts: 556
Joined: Wed May 02, 2007 9:52 pm
Location: Essex

Post by Davej »

Hi there

Try the ro-man.com site, The John Guest fittings are great but a tad pricey - but you do pay for quality.

Yes they can be used for air lines.

Regards

Dave
User avatar
Gazza
architeuthis moderator
architeuthis moderator
Posts: 5306
Joined: Sat Aug 13, 2005 7:24 pm
Location: Essex,UK
Contact:

Post by Gazza »

Yes all mine come from the RO - Man and they are quick to deliver :D www.Ro-man.com

I have changed the valves about so i can set up the tank or pond and then just isolate which one i want to use :wink:
Taggy
Hammer Head shark
Hammer Head shark
Posts: 277
Joined: Mon Aug 15, 2005 8:00 am
Location: Kent (LOL)
Contact:

Re: Messing With Water

Post by Taggy »

Ok,thick head on Gazza,


Are you splitting off your main feed on your RO before it goes in-to unit (Mains Water) Or are you spilitting of off a purifier where your mains water would return to pond and then splitting in-to RO to get the mix??


Graham
User avatar
Gazza
architeuthis moderator
architeuthis moderator
Posts: 5306
Joined: Sat Aug 13, 2005 7:24 pm
Location: Essex,UK
Contact:

Re: Messing With Water

Post by Gazza »

Hi Graham,

Don't worry mate its not a silly question and a good one mate :D

I have taped off the supply water after the pre-filters on the RO unit and to be honest i wasn't sure if this would work or not but so far so good but its still early days yet.
Post Reply