Post all Pond construction Topics here including DIY bits and pieces
Moderators: B.Scott , vippymini , Gazza , Manky Sanke
Bob Hart
Site Admin
Posts: 2292 Joined: Sun Aug 14, 2005 8:53 am
Location: Maidstone, Kent, England
Contact:
Post
by Bob Hart » Mon Jan 14, 2008 7:20 pm
Capt Nemo wrote:
But I have to say, that old shed is killing the view....... maybe a new one once all is finished with the pond, or even a Jap tea house
How can you be so cruel, I've had that shed your years and years and years - lol
Once the roof is on I intend to raise the shed roof a little, putting a poly carb roof on it and when I walk in there I wont have to duck - nor will Gazza. I'll also access it from the 'hole' end and remove the other door, which means I could extend the growing on pond - Projects, dont you love them!!!!!!!
Gazza
architeuthis moderator
Posts: 5306 Joined: Sat Aug 13, 2005 7:24 pm
Location: Essex,UK
Contact:
Post
by Gazza » Mon Jan 14, 2008 10:04 pm
Thats a good idea Bob Ive lost count how many times i have banned my head in there
Bob Hart
Site Admin
Posts: 2292 Joined: Sun Aug 14, 2005 8:53 am
Location: Maidstone, Kent, England
Contact:
Post
by Bob Hart » Mon Jan 21, 2008 7:46 pm
LOL - I thought much the same when I saw the pictures Jane, I have nearly that amount being delivered this Friday! (well it must be that amount if you see the cost of it!)
and I was in Worthing today!!!!!
Taggy
Hammer Head shark
Posts: 277 Joined: Mon Aug 15, 2005 8:00 am
Location: Kent (LOL)
Contact:
Post
by Taggy » Mon Jan 21, 2008 7:56 pm
Busy Busy at the weekend then Bob????
I take it wood is for the enclosure of pond,cant wait to see some further construction.!!!!
Graham
Capt Nemo
Hammer Head shark
Posts: 283 Joined: Sun Jan 22, 2006 9:47 pm
Location: Amersham
Post
by Capt Nemo » Fri Jan 25, 2008 1:51 pm
Never mind all that.........
get that old shed out of the way first
jason-m
Great White Shark
Posts: 784 Joined: Sat Nov 12, 2005 10:12 pm
Location: Willenhall....West Midlands
Contact:
Post
by jason-m » Fri Jan 25, 2008 4:05 pm
Busy weekend for you then Bob....
Ain't that Gazza popping round to give you a hand...
ajm808
Nurse Shark
Posts: 64 Joined: Sun May 21, 2006 8:18 pm
Location: n yorks
Post
by ajm808 » Fri Jan 25, 2008 6:03 pm
hi if your getting the wind we are here up north you'l be lucky if there still in the same town as you never mind fitted!!!!!!!!!!!
dannyboy
Black Tip Reef Shark
Posts: 198 Joined: Thu Sep 22, 2005 6:08 pm
Location: East sussex
Post
by dannyboy » Fri Jan 25, 2008 7:23 pm
Bob Hart
Site Admin
Posts: 2292 Joined: Sun Aug 14, 2005 8:53 am
Location: Maidstone, Kent, England
Contact:
Post
by Bob Hart » Fri Jan 25, 2008 7:36 pm
Capt - It just need a lic of paint really, and a new roof is planned
Jason - There may be the odd helping hand on Sunday
Andy - Breezy here, but no real wind blowing. I'll fit the sheets on Sunday and the forcast is for less wind then!
Danny - Nice new circular saw!!!!!!!
Taggy
Hammer Head shark
Posts: 277 Joined: Mon Aug 15, 2005 8:00 am
Location: Kent (LOL)
Contact:
Post
by Taggy » Fri Jan 25, 2008 7:39 pm
I think wendy summed it up when seeing what you have.
"Bob the engineer & Planner" yep that for sure can wait to see the development over the weekend,i trust the camera will be around???
Graham
Gazza
architeuthis moderator
Posts: 5306 Joined: Sat Aug 13, 2005 7:24 pm
Location: Essex,UK
Contact:
Post
by Gazza » Fri Jan 25, 2008 7:52 pm
Looks like there are going to be some busy boys this weekend
still if it rains hopefully we will be under the sheets
So how did it go with the saw Bob cut anything apart from the wood and will you be using it Sunday...........may need to bring my Kevlar
Bob Hart
Site Admin
Posts: 2292 Joined: Sun Aug 14, 2005 8:53 am
Location: Maidstone, Kent, England
Contact:
Post
by Bob Hart » Fri Jan 25, 2008 8:13 pm
Graham - Yes there is a plan, of course
Gazza - no accidents yet. After tomorrow I should have morst of the roof timbers in place, ready for fitting the Poly Carb on Sunday. Dont worry if you cant make it though.
Jules
architeuthis moderator
Posts: 882 Joined: Sat Aug 13, 2005 10:10 pm
Location: Kent
Post
by Jules » Sat Jan 26, 2008 3:07 am
Bob what ever happened to the saw and chisel? Always get a cleaner cut! Are you going to soften then edges by using a router?
Can't wait to see it finished. Keep it coming nearly been 12 months from the start hasn't it?
Jules