Post all Pond construction Topics here including DIY bits and pieces
Moderators: B.Scott , vippymini , Gazza , Manky Sanke
nicarper
Sandbar shark
Posts: 18 Joined: Tue Jan 15, 2008 5:24 pmLocation: eire
Post
by nicarper Wed Jan 16, 2008 5:23 am
Thanks for the advice markam. Jagger what does epdm stand for and where can you get these liners?
andy p
Sandbar shark
Posts: 9 Joined: Mon Nov 28, 2005 1:36 pmLocation: Runcorn Cheshire
Post
by andy p Thu Jan 17, 2008 4:44 pm
Nicarper, the height of my pond wall above ground level is near enough 3 ft give or take a couple of inches as to how the ground lies around it, the pictures do make it look more but have been out and measured.
Attachments
Pictures 008.jpg (52.7 KiB) Viewed 5034 times
nicarper
Sandbar shark
Posts: 18 Joined: Tue Jan 15, 2008 5:24 pmLocation: eire
Post
by nicarper Thu Jan 17, 2008 4:50 pm
Cheers mate.
