Windows ?
Moderators: B.Scott, vippymini, Gazza, Manky Sanke
Hi there,
I've just picked up my window from Watsons Glass tel.(01902 453444) It's 1040mm by 505mm and is made as follows following their suggestion:
8mm Toughened Float
Heatsoaked sheet 8mm
1.52mm clear PVB Interlayer
8mm Toughened Float
Heatsoaked sheet 8mm
This makes up a 17.52mm sheet. This is how it has been written on the invoice from them.
The window itself cost me £125.04, but you will need to arrange collection from them if you do use them as their delivery is stupidly expensive!
Hope it helps.
Regards,
Andy
I've just picked up my window from Watsons Glass tel.(01902 453444) It's 1040mm by 505mm and is made as follows following their suggestion:
8mm Toughened Float
Heatsoaked sheet 8mm
1.52mm clear PVB Interlayer
8mm Toughened Float
Heatsoaked sheet 8mm
This makes up a 17.52mm sheet. This is how it has been written on the invoice from them.
The window itself cost me £125.04, but you will need to arrange collection from them if you do use them as their delivery is stupidly expensive!
Hope it helps.
Regards,
Andy
Hi Gazza,
Sorry for the delay in replying not been in the country for a while. Got tomorow off and hope to get the window fitted then with any luck, I'm off out of the country again Tuesday.
Now for some help. I've been told I need to rough up the flow coat on the fibre glass prior to putting the sealant on it, but do I need to take it down to white glass or just take off the shine?
Any help greatly appreciated.
Andy
Sorry for the delay in replying not been in the country for a while. Got tomorow off and hope to get the window fitted then with any luck, I'm off out of the country again Tuesday.
Now for some help. I've been told I need to rough up the flow coat on the fibre glass prior to putting the sealant on it, but do I need to take it down to white glass or just take off the shine?
Any help greatly appreciated.
Andy