Thanks for the pics Gazza, i would need a ladder to see in top tho... small footprint tho which is good...
Chi, how about a fluid bed with K1? in, ive seen good results with these...
Hi Gazza looks good mate i think the TT option will be what i go with as i have first refusal on a Maurice TT,but if that don't come about will speak to you on where you got yours /LEE
The space available is little bigger than the cartridge filter, so not a chance, must be hydro sized or I might squeeze a small sieve if enough opinions preferred that.
As it's a pressurised system I cannot perceive benefits from K1 deployment, though I reserve the right to be wrong!
It's purely the fact that I have to clean 4 cartridges per week in the summer and 1.5 perweek in the winter, each taking some 10 minutes to clean with a pressure washer, excluding setup and clean up time. Which is why I'm thinking sieve or Hydro, as both are easily cleaned in a few minutes. The hydro can even be set up with a backlflush system with a little planning.
If I wished to move the pipework I could use my own design of sediment trap filter, which offers very low maintenance with very good performance, but I'd need to use at least a 50 gallon tank and can't fit one in.