Simply Koi and More Koi

hi gin rin i am thinking of using a pod on skimmer line is yours gravity fed ? if so what size pipe work are you using and what size pump? and do you get enough pull off the surface water many thanks gary

yes at mo both skimmers have 1.5'' pipe

a nexus 300 holds 180 gallons altogether am not sure about the easy i would guess around 40 to 50 gallons when i flush them i usually drain easy so its empty and then repeat process again just to purge the drain

i like you have two nexus 300's i sank a 200ltr plastic barrel into the ground and it has a titan 8000 ltr pump in the bottom onto this i connected 1.5 inch flexible pipe underground to waste i wired the pump into my electric box when i flush the nexus i just turn the pump on it keeps up with the fl...

i have a nexus 200 which i am planning to put on the 2 skimmers and will be gravity fed,my question is will i get enough flow through 1.5'' pipe work from the skimmers i have a sequence 10000 which i want to use

will do tictoc hopefully will be doing it at weekend if its not bloody raining,the two finger jokes could be endless lol

yes its 4 inch pipework have gone for 20mm gap thanks to all for advice will post pics soon

there are 2 bottom drains pond volume will be 7,700 gallons fed into 2 nexus 300 both with sequence 10,000 pumps

hi all am nearly finished with new pond just a quick question,is there an ideal distance to set the dome of a spindrifter to the base of the floor ie the gap where the water will go into the sump i was thinking around 3/4 of an inch